How Long Does a Water Heater Last?
What actually decides a tank's service life, why hard water shortens it, and the maintenance that moves the number in either direction.
The honest answer is a range with a lot of variables in it, and the variables are more useful than the range. Two tanks installed the same year, in the same city, can be a decade apart when they fail.
What ends a tank
Not the electronics, usually. Steel tanks fail from the inside, where water and oxygen meet the metal. The tank is lined and protected, but the protection is finite: a sacrificial anode rod corrodes in place of the steel, and when it is consumed, the shell becomes the thing that gives way.
That is why the failure looks the way it does. Water at the base, rust running down the jacket, a bulge in the body: all three are the wall failing, and none of them can be repaired. A pressurised vessel has no field fix for a hole in its shell.
What shortens the life
Water chemistry. Dissolved calcium and magnesium come out of solution when water is heated and settle as scale on the tank floor and the heating surface. Scale insulates, so the heat source works harder, and the metal around it ages faster. Local supply data is the place to start — in this region, published reports put hardness in the very hard range, which is why flushing matters more here than in a soft-water city.
Temperature setting. A tank held at a very high setting works its components harder and accelerates scale and corrosion. Lower settings extend life, with the caveat that stored water below a certain temperature carries its own risks in a system nobody maintains.
Installation quality. A unit that is not strapped, not properly vented, or sitting on a base that flexes will fail sooner than one installed correctly. Permits and inspections exist partly for this reason.
Neglect. A tank that has never been flushed carries a layer that keeps heat from reaching the water, and an anode rod that was never checked is a rod that ran out without anyone noticing.
What lengthens it
Flushing on a schedule suited to the water, and replacing the anode rod before it is spent. Those two actions are the whole of useful preventive maintenance on a tank, and they are cheap against the alternative.
There is one caution worth stating plainly: on a tank that has gone a decade or more without attention, a first flush can open a leak where the floor has thinned. That risk is real, and it is a reason to talk to someone before draining an old unit rather than after.
The parts that fail before the tank
Elements, thermostats, thermocouples, igniters, gas valves and relief valves are all replaceable, and replacing one is not a sign the tank is finished. The judgement is whether the repair buys a year or a month, which depends on the tank's age and the water it has been heating.
Reading your own unit
The data plate carries a serial number that encodes the build date, and most manufacturers publish how to read their own numbering. That date, plus a maintenance history, is the best evidence available. A tank with no history and an old date is a candidate for planning, not panic.